SteamInputDB

AL2009man

Total
188
Controller Type
Must have
Must not have
690790
DualSense Gyro-Optimized Config (V. 1.00) DualSense over 2 years combined playtime In-Game Requirements: Set the Steering Sensitivity Settings [under Options > Input > Connected Devices > Select Xbox 360/One Controller > Advanced Setting] to those settings: Steering Sensitivity at [100%], Steering Linearity [between 0-5%], Steering Saturation to [100%] & Steering Deadzone [between 0-15%] depending on your PlayStation Controller's IMU, I suggest heading to Steam Controller General Settings and calibrate the Gyro if you haven't. - Controls: To Switch Between Standard and Gyro Controls Action Sets; Press Touchpad on the Right Side (THIS WILL BE NECESSARY FOR MENU NAVIGATION) while the Left Side is the [SELECT] Button.
Gyro Inputs Gamepad Inputs
😎 56.5%
46 /24
(Rating from Steam)
782330
DualSense Gyro-Optimized Config (V. 1.02) DualSense 7 months combined playtime In-Game Requirements: Reduce Aim Assist Strength at 20% or lower (Alternatively, turning off Aim Assist). For Best Performance: Increase the In-Game Controller Sensitivity settings and either change Controller Layout to Tactical or Rebind them In-Game. - Press The Left Side of Touchpad to Switch to "Standard Controls" Action Set (Necessary for Menu Navigation. But while in-game: Holding the button will enter to the Dossier and switches Action Set immediately) while The Right Side is the SELECT Button.
Mouse Inputs Gyro Inputs Gamepad Inputs
😎 58.4%
30 /7
(Rating from Steam)
1151640
DualSense Gyro-Optimized Config (V. 1.20) DualSense almost 6 years combined playtime NOTE: As of Game Version 1.10, Horizon: Zero Dawn currently has SteamInput API [Implementation] issues amongst many others. To ensure Gameplay Compatibility, Gyro Aiming is activated by Holding L2 Full Pull all the way down. - Controls: Clicking the Touchpad opens the Menu, but you can swipe in four directions for Quick Menu Access while Holding the Options Button switches to “Standard Controller” Action Layer, recommended for Photo Mode.
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs
😎 64.9%
126 /45
(Rating from Steam)
1259420
DualSense Gyro-Optimized Config (V. 1.01) DualSense almost 2 years combined playtime NOTE: As of Game Patch 1.06, there's a Simultaneous Input bug which the Camera Acceleration becomes choppy if both inputs are in use. This requires me to use the Mode Shift method to make this config work. To adjust Aiming Sensitivity: head to the Right Stick Input style > Advanced Settings > Mode Shifting and start from there.
Mouse Inputs Mode Shifts Gyro Inputs Action Sets
😎 57.9%
38 /14
(Rating from Steam)
8870
DualSense Gyro-Optimized Configuration - ADS-only Gyro (V. 1.02) DualSense 5 months combined playtime In-Game Requirements: Go to Options, Switch to "Marksman" Control Layout under "Controller" and disable [Enable Mouse Acceleration] under "Keyboard / Mouse" respectively. While I suggest reducing the Mouse Sensitivity value to 50 (via XInput.ini), it should work fine without it. - Press the Left side of the Touchpad for [SELECT], while holding the same button to switch to "Standard Controls" Action Set. Press the right side of the Touchpad for [Melee], this is in order to perform [Execute] when possible.
Mouse Inputs Gyro Inputs Gamepad Inputs
🙁 50.5%
5 /4
(Rating from Steam)
550
DualSense Gyro-Optimized Config (V. 1.02) DualSense 2 months combined playtime Note: For the best possible experience, please disable “Auto-Aim” in-game. - Controls: To Reset the Camera, Press and Hold the R3 Button. - Press the Touchpad to check the [Scoreboard] or [Vote Yes]. Touching Both Sides of the Touchpad will open either Vocalizer Order (Left Side) or Response (Right Side) Quick Menus respectively, allowing you to Gesture Swipe or Left/Right Sticks within. Due to the way how DualSense’s Touchpad sensitivity works, it may not work perfect.
Mouse Inputs Gyro Inputs Action Sets Touch Menus
😎 54.7%
14 /3
(Rating from Steam)
1151640
SC-Optimized Config - With Mode-Shift/Fixed Official Config (V. 1.03) Steam Controller (2015) 4 months combined playtime IMPORTANT NOTE: As of Game Version 1.06, Horizon: Zero Dawn currently has Steam Input API [Implementation] issues amongst other things. - To ensure Gameplay Compatibility, Gyro and Right Trackpad Mouse-like Camera is activated by Clicking [Left Trigger Full Pull] while increasing Controller Sensitivity is required via In-Game Controller Setting.
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs
😎 54.3%
13 /3
(Rating from Steam)
550
Improved Official L4D2 Config (The Last Stand Update) - Version 1.00 Steam Controller (2015) 10 days combined playtime Valve has recently updated Steam Input implementation for Left 4 Dead 2 as part of The Last Stand Update. But there are some minor issues (such as Y Button using Spray instead of Flashlight) that needed fixing, this Config is made to solve some issues while adjusting/reworking parts of the config (Such as Reorganized Touch Menu and Fixing Order / Response Quick Menu) while remaining true to Default Config.
Mouse Inputs Gyro Inputs Action Sets Touch Menus
😎 51.9%
6 /2
(Rating from Steam)
782330
DS4 Gyro-Optimized Config (V. 1.02) DualShock 4 5 days combined playtime In-Game Requirements: Reduce Aim Assist Strength at 20% or lower (Alternatively, turning off Aim Assist). For Best Performance: Increase the In-Game Controller Sensitivity settings and either change Controller Layout to Tactical or Rebind them In-Game. - Press The Left Side of Touchpad to Switch to "Standard Controls" Action Set (Necessary for Menu Navigation. But while in-game: Holding the button will enter to the Dossier and switches Action Set immediately) while The Right Side is the SELECT Button.
Mouse Inputs Gyro Inputs Gamepad Inputs
😎 51.5%
3 /0
(Rating from Steam)
49520
DualSense Gyro-Optimized Config - ADS-Only Gyro Aim (V. 1.00) DualSense 24 days combined playtime Based on the PS Vita version of Borderlands 2, this config only uses ADS-only Gyro Aim. - Press the Left side of the Trackpad to switch to [Vehicle] Action Set, while the Right side is the [SELECT] Button.
Mouse Inputs Mode Shifts Gyro Inputs Gamepad Inputs
😎 52.8%
7 /1
(Rating from Steam)
714010
DS4 Gyro-Optimized Config (V. 1.12) DualShock 4 11 days combined playtime In-Game Requirement: This config is designed for Default Game Profile [Aim Lab]. Before you configure your general settings: please leave most of the settings by default (including Input Source as Raw Mouse) to make it easier to adjust by your personal preference.
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs Gamepad Inputs
😎 52.4%
5 /0
(Rating from Steam)
1085660
Controller Layout config Fix /w Gyro Aim DualShock 4 3 months combined playtime This config emulates Default Controller Layout, but unlike my "DS4 Gyro-Optimized Config", Gyro Aiming is only used. - There are 3 different methods of Pressing Options button: a button press switches to [Menu UI] Action Set, Double Tapping for Start Menu and [Hold] for Character Menu
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs
😎 55.6%
15 /2
(Rating from Steam)
2058180
Official Judgement Config but with proper Nintendo layout Nintendo Switch Pro 6 months combined playtime ["Nintendo Face Button Layout" toggle required] This config will correct the Face button layout to be equivalent to the in-game button prompts, as it relies on the Xbox layout across Menu and Gameplay.
Gamepad Inputs
😎 51.4%
4 /1
(Rating from Steam)
379720
DualSense Gyro-Optimized Config (V. 1.00) DualSense 2 months combined playtime In-Game Requirements: Turn off Aim Assist, Set Look Smoothing around 30% or lower. For the Best Performance: Increase Controller Sensitivity and Change Controller Layout to "Tactical". - Press The Left Side of Touchpad to Switch to Standard Controls, necessary for Menu Navigation while The Right Side is the SELECT Button.
Mouse Inputs Gyro Inputs Gamepad Inputs
😎 55.3%
23 /9
(Rating from Steam)
254700
DualSense Gyro-Optimized Config (V. 1.01) DualSense almost 2 years combined playtime Requirement: Go to Controller Setup > Xbox 360 Controller > Button Configuration and select Control [Type III] and then set Mouse Sensitivity to Number 15 if you haven’t. while it is optimized for [Classic] Aiming Mode for Mouse Input, [Modern] Aiming Mode can be used, but you may have to reduce the sensitivity. - For QTEs: X+C Keys will be Square+Cross IF you’re in the Middle of Aiming, & [Shake Mouse] is [Left Stick] if you let go of “Ready Weapon” the moment the enemy grabs you. but if you see either Left or Right Mouse Click in case Button Prompt switches during QTE Cutscenes, then it’s Right or Left Triggers respectively. Otherwise, All QTE scenes will work perfectly. You can switch back to [Standard Controls] Action Sets by Clicking the Left side of Touchpad, recommended for the Vehicle Session of the game. - The START and SELECT Button has been switched, START button is moved to the Right Side of the Touchpad Click, while the SELECT button is moved to Options Button for better consistency.
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs Gamepad Inputs
😎 59%
91 /48
(Rating from Steam)
2072450
fixed Nintendo Switch button layout Nintendo Switch Pro about 1 year combined playtime [requires "Use Nintendo Layout" toggle within Steam Input settings] Corrects the face buttons to use the Xbox-layout button prompts to match in-game icons
Gamepad Inputs
🙁 51%
2 /0
(Rating from Steam)
220
SIAPI XB360-like Config (V. 1.10) Steam Controller (2015) 14 days combined playtime This config aims to replicate the original Xbox 360/The Orange Box's Controls Layout. Intended as a alternative to the 20th Anniversary Controls layout. You might wanna adjust the Trackpad movement.
Mouse Inputs Action Sets
🙁 51%
2 /0
(Rating from Steam)
220
SIAPI XB360-like Config (V. 1.10) Steam Controller (2015) 1 day combined playtime This config aims to replicate the original Xbox 360/The Orange Box's Controls Layout. Intended as a alternative to the 20th Anniversary Controls layout. You might wanna adjust the Trackpad movement and Aim Assist for this one.
Mouse Inputs Action Sets
🙁 51%
2 /0
(Rating from Steam)
1259420
DS4 Gyro-Optimized Config (V. 1.01) DualShock 4 4 months combined playtime NOTE: As of Game Patch 1.06, there's a Simultaneous Input bug which the Camera Acceleration becomes choppy if both inputs are in use. This requires me to use the Mode Shift method to make this config work. To adjust Aiming Sensitivity: head to the Right Stick Input style > Advanced Settings > Mode Shifting and start from there.
Mouse Inputs Mode Shifts Gyro Inputs Action Sets
😎 53.7%
8 /0
(Rating from Steam)
254700
DS4 Gyro-Optimized Config (V. 1.04) DualShock 4 about 1 month combined playtime Requirement: Go to Controller Setup > Xbox 360 Controller > Button Configuration and select Control [Type III] and then set Mouse Sensitivity to Number 15 if you haven’t. while it is optimized for [Classic] Aiming Mode for Mouse Input, [Modern] Aiming Mode can be used, but you may have to reduce the sensitivity. - For QTEs: X+C Keys will be Square+Cross IF you’re in the Middle of Aiming, & [Shake Mouse] is [Left Stick] if you let go of “Ready Weapon” the moment the enemy grabs you. but if you see either Left or Right Mouse Click in case Button Prompt switches during QTE Cutscenes, then it’s Right or Left Triggers respectively. Otherwise, All QTE scenes will work perfectly. You can switch back to [Standard Controls] Action Sets by Clicking the Left side of Touchpad, recommended for the Vehicle Session of the game. - The START and SELECT Button has been switched, START button is moved to the Right Side of the Touchpad Click, while the SELECT button is moved to Options Button for better consistency.
Mouse Inputs Keyboard Inputs Mode Shifts Gyro Inputs Gamepad Inputs
😎 53.2%
9 /2
(Rating from Steam)